Question: What Are The Five Basic Safety Rules For Hand And Power Tools?

What are the safety precautions to be taken while using power tools?

To prevent hazards associated with the use of power tools, workers should observe the following general precautions: Never carry a tool by the cord or hose.

Never yank the cord or the hose to disconnect it from the receptacle….GuardsPoint of operation.In-running nip points.Rotating parts.Flying chips and sparks..

What are some safety tools?

Transport hand tools only in tool boxes or tool belts.Hammer Safety. Use a claw hammer for pulling nails and for driving nails. … Power Drill Safety. … Power Saw Safety. … Hand Files & Rasp Safety. … Chisel Safety. … Tool Boxes, Tool Chests & Cabinets.

What are general hand tools?

A hand tool is any tool that is powered by hand rather than a motor. Categories of hand tools include wrenches, pliers, cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, drills and knives.

What are the basic safety rules?

Basic Safety RulesSTAY ALERT – and stay alive. … WEAR THE RIGHT CLOTHES – work clothes should fit properly. … USE THE RIGHT TOOLS – if you need a hammer, get a hammer. … LEARN HOW TO LIFT – Lifting takes more than muscle; it is an art. … DON’T BE A PRANKSTER – practical jokes and horseplay can be dangerous, especially around heavy machinery.More items…

What are the classifications of tools?

 Classifications of tools and equipment according to their uses:Measuring tools.Holding tools.Cutting tools.Driving tools.Boring tools 6. Electrical equipment 7. Miscellaneous tools/instrument/equipment.

What is a mushroomed tool?

Struck tools or hammered tools are made in various shapes and sizes and for many uses and include cold chisels, punches, drift pins, nail sets, rock and star drills, and wedges. … Use the tools only if they are in good condition (i.e., cutting edges are sharp, struck head is not mushroomed or chipped).

What size air compressor do I need to run air tools?

It’s important to know if the compressor you purchase will drive the air tool you’ll need for your project. For example, smaller air nailers run on 2 to 5 CFM at 70 to 90 PSI, while larger shears, air sanders require up to 10 or more CFM and 100 to 120 PSI.

How do I check my hand tools?

Common Hand Tool Inspection ItemsHammers– Ensure that the handle is not broken or chipped. … Screwdrivers– Ensure the handle is not chipped or broken. … Chisels– Chisels are strong tools, but just like any other tool they will begin to break down over time. … Wrenches– Check that the wrench is not bent.

What are the 11 Classification of hand tools?

11 Classification tools in Carpentry:Measuring tools.Mark Lining tools.Testing tools.Edge cutting tools.Tooth cutting tools.Boring tools.Holding tools.Driving tools.More items…•

What is the proper handling of tools?

Pointed tools such as chisels and screwdrivers should never be carried in a worker’s pocket. Acceptable ways to carry them include in a toolbox, pointed down in a tool belt or pocket tool pouch, or in the hand with the tip always held away from the body. Tools should always be put away when not in use.

What should you do before using any tool?

Remove any wrenches and adjusting tools before turning on a tool. Inspect the cord for fraying or damage before each use. Tag defective tools clearly with an “Out of service” tag and replace immediately with a tool in good running order. During use, keep power cords clear of tools and the path that the tool will take.

What are the basic safety guidelines for using hand tools?

Basic Safety Rules for Hand ToolsALWAYS WEAR EYE PROTECTION.Wear the RIGHT SAFETY EQUIPMENT for the job.Use tools that are the RIGHT SIZE & RIGHT TYPE for your job.Follow the correct procedure for using EVERY tool.Keep your cutting tools SHARP and in good condition.DON’T work with OILY or GREASY hands.More items…•

How do you use power tools?

Safety tips for electric power tools:Keep floors dry and clean to avoid slipping while working with or around dangerous tools.Keep cords from presenting a tripping hazard.Never carry a power tool by its cord.Use tools that are double-insulated or have a three-pronged cord and are plugged into a grounded receptacle.More items…

What is the main danger associated with pneumatic tools?

The main danger these tools pose is getting hit by the accidentally detached hose and hose fastener. Getting hit by accidentally detached tool attachments and fragments is equally dangerous. Some things should be considered before using pneumatic tools for construction site safety purposes.

What should I avoid using hand tools?

What should I avoid when using hand tools?Do not use tools for jobs they are not intended to do. … Do not apply excessive force or pressure on tools.Do not cut towards yourself when using cutting tools.Do not hold the stock in the palm of your hand when using a cutting tool or a screwdriver.More items…

What is the first rule of safety?

The safety-first rule is a tenet of modern portfolio theory (MPT), which believes that risk is an inherent part of reaping a higher level of reward. In this context, safety first means minimizing the probability of negative returns.

What are the 5 safety rules?

The 5 safety rules at a glanceDisconnect completely. Meaning that the electrical installation must be disconnected from live parts on all poles. … Secure against re-connection. … Verify that the installation is dead. … Carry out earthing and short-circuiting. … Provide protection against adjacent live parts.

What are the name of cutting tools?

Abrasive saw.Axe.Blade.Bandsaw.Bolt cutter.Broach.Ceramic tile cutter.Chainsaw.More items…

What are examples of pneumatic tools?

What are pneumatic tools? Pneumatic tools are powered by compressed air. Common types of these air-powered hand tools that are used in industry include buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches.

What are three signs of hazard in a power tool and cord?

Power tools present hazards such as noise, vibration, electrical, moving parts and projectiles. They have the power to cause severe and even fatal injury if used incorrectly.

What are 10 safety rules?

10 Safety Rules Your Child Should LearnRule #1: Know Your Name, Number, & Address. … Rule #2 Talking to Strangers is a Big No. … Rule #3 Good Touch & Bad Touch. … Rule #4 Never Climb a Wall or a Fence. … Rule #5 Playing with Fire & Sharp Objects Not Allowed. … Rule #6 Your Child Should be Aware of the School Emergency Procedures.More items…•