Quick Answer: Can You Use 1333mhz Ram In 1066MHz?

Does dh61ww support 1600mhz RAM?

Splendid.

Intel® Desktop Board DH61WW no, your mobo is limited to 1333mhz, no overclocking possible.

but you will be able to run all 16gb.

for optimal performance try tightening timings a bit!.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Is it better to have 2 sticks of RAM or 4?

Polypheme. On dual channel motherboard 2 ram modules give the best performance. Going to 4 modules requires Command Rate increase from 1T to 2T and that causes slight performance hit. Not that it would be very noticeable, but it’s there.

Does ddr3 RAM speed matter?

The faster the number, the faster your computer can store and retrieve the data stored in local memory. … These numbers generally follow the speed rating corresponding to the generational standard: “DDR3 1600 RAM” is also labelled as “PC3 12800,” “DDR4 2400 RAM” is also “PC4 19200,” and so on.

Can I use 1600mhz RAM with 1333mhz RAM?

The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.

Can I use RAM with different MHz?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

Can I use 4gb and 8gb RAM together?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

Can I use 2 different brands of RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. … Different brands of Ram are fine to use together.

Does faster RAM work slower motherboard?

Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. Your motherboard will recognize those faster RAM sticks as being compatible (because they are) and allow the system to boot up and operate normally after you install them.

What is the difference between ddr3/1600 and 1866?

Faster RAM means better minimums. The DDR3-2400 CAS 10 kit was a full 9.7% faster than the DDR3-1600 kit, far exceeding our expectations drawn from the baseline set by 3DMark. … Likewise, the DDR3-1600 and DDR3-1866 are basically identical in performance.

Is 1333mhz RAM good for gaming?

Yes it definitely is. Recent benchmarks show that there is little difference, like 5% between 1333Mhz or super high-end 2133Mhz modules. So it’s kind of a waste to overspend on expensive RAM. Your extra dollars will be better spent on a SSD, or a better GPU or CPU.

Can I put 1600mhz ram in a 1066MHz slot?

Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used . … both RAMs will run at same speed. If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course.